Troubleshooting Guide - DeWalt DCN45RN Guide D'utilisation

ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental
or consequential damages, so these limitations may not
apply to you. This warranty gives you specific legal rights
and you may have other rights which vary in certain states
or provinces.
In addition to the warranty D
by our:
1 YEAR FREE sERViCE
D WALT will maintain the tool and replace worn parts
e
caused by normal use, for free, any time during the first year
after purchase. Nailer wear items such as return springs,
driver blades, and bumpers are not covered.
2 YEARs FREE sERViCE On D
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360,
DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT,
DCB207, DCB361
3 YEARs FREE sERViCE On D
DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT,
DCB206, DCB230, DCB606, DCB609, DCB612
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR PERSISTENT
PROBLEMS, CONTACT A D

WARNING: To reduce the risk of serious personal injury, ALWAYS disconnect battery pack from tool before
all repairs.
sYMPTOM
Motor does not run with
trigger depressed
Motor does not run with contact
trip depressed
WALT tools are covered
e
WAlT BATTERY PACKs
e
WAlT BATTERY PACKs
e

TROUBLESHOOTING GUIDE

WALT SERVICE CENTER OR CALL 1-(800)-4-D
e
CAUsE
Trigger lock in locked position.
Tool is stalled, locking the motor from rotating.
Tool internal electronics need to be reset.
Motor stops running after 5 seconds.
Terminals are dirty or damaged.
Damaged internal electronics.
Damaged trigger.
Trigger lock in locked position.
Tool is stalled, locking the motor from rotating.
Bent contact trip.
Motor stops running after 5 seconds.
Terminals are dirty or damaged.
Damaged internal electronics.
Damaged trigger.
nOTE: Battery warranty voided if the battery pack is
tampered with in any way. D
for any injury caused by tampering and may prosecute
warranty fraud to the fullest extent permitted by law.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your D WALT Power Tool or Nailer for any reason, you can
e
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1-800-433-9258) for a free replacement.
FiX
Unlock trigger lock.
Rotate the stall release lever on the tool and the mechanism
will release. If driver blade does not return, remove battery and
manually push driver blade back to home position.
Remove battery, wait 3 seconds and reinsert.
Normal operation, release trigger and redepress.
See authorized service center.
See authorized service center.
See authorized service center.
Unlock trigger lock.
Rotate the stall release lever on the tool and the mechanism
will release. If driver blade does not return, remove battery and
manually push driver blade back to home position.
See authorized service center.
Normal operation, release contact trip and redepress.
See authorized service center.
See authorized service center.
See authorized service center.
English
WALT is not responsible
e
WALT
e
WALT.
e
15