Programme Timer Settings - Dovre VINTAGE 35GA Installation Et Mode D'emploi

09-20020-235
4. Press
(small flame) to lower the
reduction temperature.
09-20020-236
5. Press OFF or wait until programming is finished.

Programme timer settings

Standard settings:
Programme 1:
P1 : 06:00
Programme 2:
P2 : 23:50
You can programme two time settings per day.
The day starts at 00:00 and ends at 23:50.
24
nighttime
P1 : 08:00
P2 : 23:50
The time settings must be programmed in the fol-
lowing sequence:
P1 ≤ P1 < P2
At P1 = P1 or P2
timer off.
Use the following setting so the stove stays lit at
night:
P2 23:50 and P1
09-20020-237
Select Timer mode by briefly pressing SET.
P1 ON time setting
09-20020-238
1. Continue pressing SET until P1
and the time setting flashes.
Subject to change because of technical improvements
≤ P2 .
= P2 switches the
0:00
(sun) appears