Time Settings; Programming The On/Off Temperature - Dovre VINTAGE 35GA Installation Et Mode D'emploi

Press OFF and (small flame) until the Fahren-
heit/12-hour-clock display changes to Celsius/24-hour
clock and vice versa.

Time settings

09-20020-228
The time indicator flashes after:
a. placing the battery or
b. simultaneous pressing of
(small flame)
1. Press
(large flame) to set the hour.
2. Press (small flame) to set the minutes.
3. Press OFF or wait until the manual operating
mode is reached.
Programming the on/off
temperature
Setting the DAYTIME temperature
Standard settings: TEMP, 23 °C/74 °F
22
(large flame) and
09-20020-229
1. Briefly press SET to enter the
2. Continue pressingSET until TEMP flashes.
09-20020-230
3. Press (large flame) to raise the
perature setting.
Subject to change because of technical improvements
TEMP mode.
daytime tem-