Dovre VINTAGE 35GA Installation Et Mode D'emploi page 56

The cast iron side panels can also be easily
unhooked by loosening the top nut a bit; see
next figure.
1. Remove the glass pane from the stove; see next
figure.
a. Unhook the spring-action brackets (1) while
supporting the glass pane to prevent it from fall-
ing forward out of the door.
b. Remove the glass pane (2).
When replacing the glass pane, check that
the sealing cord is in the right place and fits
properly.
8
1
2
2. Remove the box with the wood block set and other
09-20020-185
3. Remove the burner (1) from the stove; see next fig-
4. Remove the mirror panels from the stove; see fol-
09-20020-219
2
parts included separately in the delivery from the
appliance.
ure.
1
lowing figures.
The mirror panels are glass and very fra-
gile.
a. Unscrew the two glass attachment brackets
on the back with parts (1) and (2).
b. Lift the rear mirror panel (3) from the groove.
c. Remove the panel from the stove.
d. Repeat steps (a) through (c) for both side pan-
els.
Subject to change because of technical improvements
1
09-20020-186
09-20020-187