Maintenance - ACteon Sopix 2 Manuel D'utilisation

The Sopix² digital x-ray system does not need any maintenance if it is used according to the manufacturer use
and cleaning instructions.
Before first using any device from the Sopix² range, it is imperative to follow the complete disinfecting
procedure.
Any device from the Sopix² range returned to the manufacturer or distributor for servicing or maintenance
should have been carefully disinfected before shipping.
Any device of the Sopix² range coming back from servicing or maintenance operation should follow the complete
disinfecting procedure before being used.
8.1. CONTROLLER MAINTENANCE
DESCRIPTION RECOMMENDATIONS
Decontamination • Surface disinfectant
and disinfecting.
• Surface cleaning
E N G L I S H

MAINTENANCE

USE INSTRUCTIONS AND PRECAUTIONS
Spray at 40 cm
spray of Septol™
type Spray Surface
without Aldehyde –
Pierre Rolland.
Take the wipe,
and disinfecting
wipes of Wipes
Septol™ type -
Pierre Rolland.
Allow to dry in the
Carefully close the
8

 Do not
from the surface
and allow to dry.
 Do not
wring it, and then
scrub until
obtaining visible
cleanliness.
open air.
packaging box.
S o p i x
WARNING

Do not use products
scrub. containing:
• Ammoniac,
trichloroethylene
• Dichloroethylene
• Ammonium
hydrochlorid
rinse. • Chlorinated and
aromatic
hydrocarbon
• Ethylene
dichloride
• Methylene
chloride
• Ketones
Deterioration risks
of the plastic parts.
²
• U s e r m a n u a l
19