ACteon Sopix 2 Manuel D'utilisation page 6

3.4. PRECAUTIONS TO TAKE FOR THE SENSOR(S)
It is imperative to take some precautions for use of the sensors, particularly:
• YOU MUST handle the sensor with much care.
• YOU MUST use a SOPRO sensor protector for each patient.
• YOU MUST use a positioning kit to correctly place the sensor.
• YOU MUST use a disinfecting wipe to clean the sensor.
• YOU MUST put the sensor on its support.
• DO NOT put the sensor in an autoclave.
• DO NOT drop the sensor.
• DO NOT hold the sensor with clamp forceps.
• DO NOT hold the sensor with the connecting cable.
• DO NOT roll over or walk on the connecting cable.
• DO NOT ask the patient to bite the sensor or the connecting cable.
• DO NOT immerse the sensor.
• DO NOT open the sensor or controller in case of failure.
• DO NOT use protections other than the SOPRO sensor protectors.
• DO NOT use abrasive product to clean the sensor.
3.5. PRECAUTIONS TO TAKE FOR THE USB PORT
Most of current motherboards are equipped with two USB channels. Each channel has two USB ports to connect
various peripherals.
WARNING:
It is recommended to dedicate a USB channel for the imaging system. This will ensure the performance and
the transmission speed of Sopix² system data will not be affected by the fact that another peripheral is on
the same channel.
E N G L I S H
²
S o p i x • U s e r m a n u a l
5