ACteon Sopix 2 Manuel D'utilisation page 17

• Once the box is connected to the PC, Windows detects the Sopix² system and indicates it is ready to install
the drivers. A window displays. Keep the option « install automatically the software» and click on « Next ».
WARNING:
Insert the Sopro Imaging software into the CD driver in order to install the drivers.
• During the installation of the drivers and hardware, a dialog box displays, click on « Continue » to continue
installing the system without taking into consideration the Windows message.
• After a few moments, the installation is completed. A window opens. Click on « Finish ».
The Sopix² system is ready to receive the sensor.
NOTE:
Please, refer to the use instructions of the used imaging software to determine know the installation mode
of Sopix² system inside it.
16
²
S o p i x • U s e r m a n u a l
E N G L I S H