ACteon Sopix 2 Manuel D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
• A dialog box opens - it is the main menu window for installing a certain number of programs related to Sopro
Imaging application.
• Click on « Install Sopro Imaging ». A window displays; select the desired language during the installation
process.
• A dialog box opens. It displays the software license to be entirely read to continue the installation. Once the
terms are read, click on « Next ».
• By default, the Imaging SOPRO software will automatically install in the directory « C:\Program Files\Sopro
Imaging ». To start installing the software, click on « Next ».
• Once the installation is completed, a dialog box displays. Click on « Finish ».
Once the software installation is completed, you just have to connect the Sopix² system to the computer.
6.2. SOPIX² SYSTEM INSTALLATION
Before installing the Sopix² system, make sure the computer is connected to an outlet correctly grounded.
Now, follow the below indications:
• Connect the Sopix² system USB connector to the computer.
WARNING:
Never connect the USB cable to the port found on the computer front plate.
Indeed, the connectors present on the computer front plate are much more sensitive to the various USB
signal interference and this may cause a dysfunction of our x-ray system.
For electrical safety reasons, the computer on which the imaging system will be connected, as well as the
printer, should comply with IEC 60950 standard. Be sure their respective manual indicates the compliance
with this standard and that it supplies a cleaning and/or disinfecting procedure.
These elements should be placed more than 1.50m from the chair so that they are not part of the patient's
environment. No peripherals (other than the ones specified) should be connected to the system.
No mobile stand with multiple plugs; and no additional or extension cord (other than that supplied by
SOPRO) should be connected to the system.
Check the electric installation compliance with the standards in force in the country where the system is.
E N G L I S H
²
S o p i x
• U s e r m a n u a l
15

Publicité

Table des Matières
loading

Table des Matières