Switching On The Drive System Following A Standstill - Trek FAZUA Manuel Du Propriétaire

Range/route planning:
How long or far you can ride your e-bike before you have to recharge the
battery depends on several factors.
These factors include, for example:
• The set support level;
• The (riding) speed at which you move forwards;
• The way in which you change gear;
• The type of tyres and the set tyre pressure;
• The selected route and weather conditions;
• The weight of the rider and the e-bike (total weight);
• The condition and age of the battery.
The following general principles apply:
► Familiarise yourself with your e-bike step by step and stay away from
roads and heavy traffic initially.
► Test the maximum range of your e-bike under various outdoor condi-
tions before planning longer trips. An exact statement regarding the
range of your system is not possible before or during a trip.
Storage and operating temperatures
► Observe the operating and storage temperatures for the compo-
nents of the drive system and for the components of your e-bike, and
in particular those for the battery, as it can be damaged by extreme
temperatures.

4.4 Switching on the drive system following a standstill

Your e-bike will be at a standstill as soon as it is switched off.
• After 15 minutes of standstill, the drive system (not the battery!)
switches off automatically.
The drive system can be switched on again using the remote by
briefly pressing the centre button.
• After 8 hours of standstill (provided no button/touch sensor is
pressed during this time), the battery switches off.
EN-26
- 36 -
evation |