Trek FAZUA Manuel Du Propriétaire page 69

23.4.1 General information on the mode
Pushing support makes it easier to push the e-bike.
In "Pushing support" mode, your e-bike can reach a speed of up to 6 km/h
depending on the gear set.
You can brake the speed of the e-bike to your walking pace by holding or
restraining the e-bike while pushing.
Pushing support is automatically deactivated in the following situations:
• You release the bottom button,
• The wheels on the e-bike are blocked,
• The e-bike reaches a speed of more than 6 km/h.
23.4.2 Switching the "Pushing support" mode on and off
1. Use remote b to switch on support
mode "none".
2. Hold down the bottom button on
remote b to activate pushing support.
After 2 seconds, the pushing support
is activated and sets the e-bike in
motion as long as you keep the
button pressed.
3. Guide the e-bike with both hands and
brake as necessary to adjust the speed of the e-bike with your own
walking pace by holding or restraining the e-bike while pushing.
4. Switch off the pushing support by releasing the bottom button.
| evation
- 67 -
3
EN-57