Technical Data; Using The Bottom Bracket - Trek FAZUA Manuel Du Propriétaire

Part designations
1 →
Interface (drivepack)
2
→ Speed sensor
3
→ Marking (alignment of spoke magnet/speed sensor)
4 →
Spoke magnet
5 →
Fixing screw (spoke magnet)
The numbering 1 – 5 within this section refers to the indi-
vidual parts of the component

17 TECHNICAL DATA

TECHNICAL DATA ON THE BOTTOM BRACKET
Support torque, max.
Q-factor, min.
Chain line
Protection type
Weight, approx.
Operating temperature
Storage temperature (< 1 month)
Storage temperature (> 1 month)

18 USING THE BOTTOM BRACKET

The bottom bracket is already fitted to your e-bike on delivery. You are not
permitted to make any changes to the bottom bracket as you may affect
the safety and function of the drive system.
It may be necessary to align only the speed sensor connected to the
bottom bracket as well as the corresponding spoke magnet in some
circumstances.
| evation
B
(bottom bracket).
→
55 Nm
→
135 mm (without crank arm)
→
49 mm, 52 mm
→
IP54
→
1.3 kg
→
-5 °C to +40 °C (ambient temperature)
→
-15 °C to +60 °C
→
-15 °C to +25 °C
- 57 -
EN-47