Trek FAZUA Manuel Du Propriétaire page 45

► Always keep all components of the e-bike and drive system in a clean
condition.
► Clean the components gently with a cloth or soft brush.
► After cleaning, wipe all surfaces and components to dry them.
► Pay particular attention to the contacts and interfaces between the
battery and the drivepack, and between the drivepack and the bottom
bracket: The interfaces must not be soiled or contaminated and must
be completely dry before inserting the components to avoid damage.
► Clean the radiator of the drivepack regularly.
Do not clean the radiator until it is visibly or heavily soiled!
► Keep the drainage opening on
the radiator clean and clear to
ensure that splash water and/
or condensation can drain
off the drivepack without
any problems. The drainage
opening is located on the
cooling unit directly above the
USB port or the corresponding
cover (see figure on the right).
► Lubricate the locker for
locking the drivepack to the
frame about every 2 – 3 months or at the latest as soon as it can no
longer be easily operated.
► If you have any questions about cleaning and maintenance of your
drive system, please contact a Fazua Servicepartner or visit the official
Fazua service platform (www.fazua.com/help).
| evation
- 43 -
EN-33