(Time Machine Recording) - Sony MDS-JE520 Mode D'emploi

Recording on MDs
To select "T.Mark Off" or "T.Mark LSyn" in Setup
Menu 02, do the procedure below:
1
While the deck is stopped, press MENU/NO
twice to display "Setup Menu".
2
Turn AMS to select "Setup 02", then press AMS.
3
Turn AMS to select "T.Mark Off" or "T.Mark
LSyn", then press AMS.
"L.SYNC" lights up when you select "T.Mark
LSyn".
4
Press MENU/NO.
z
You can set the reference level that must pass
before a rise marks a new track number
In Automatic Track Marking, the input signal must
remain at or below a given reference level for
1.5 seconds or longer before a rise above the reference
level will mark a new track number.
Do the following procedure to specify the reference
level. Note that "T.Mark LSyn" should be selected in
Setup Menu 02.
1 While the deck is stopped, press MENU/NO twice to
display "Setup Menu".
2 Turn AMS to select "Setup 03", then press AMS.
3 Turn AMS to set the reference level.
You can set the reference level at –72 dB to 0 dB in
2 dB steps.
4 After selecting the reference level, press AMS.
5 Press MENU/NO.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will recall the last settings of the Automatic Track
Marking Function ("T.Mark LSyn" or "T.Mark Off") the next
time you turn on the deck.
14 EN
Starting Recording With
6 Seconds of Prestored Audio
Data (Time Machine Recording)
When recording from an FM or satellite broadcast, the
first few seconds of material are often lost due to the
time it takes you to ascertain the contents and press the
record button. To prevent the loss of this material, the
Time Machine Recording Function constantly stores
6 seconds of the most recent audio data in a buffer
memory so that when you begin recording the
program source using this function, the recording
actually begins with the 6 seconds of audio data stored
in the buffer memory in advance as shown in the
illustration below.
When you press
AMS in Step 3
Audio data in 6-second buffer memory
Beginning of the program
source to be recorded
≠ AMS ±
§
EJECT
≠ ±
AMS
0 ) r
·
P p
1
Do Steps 1 to 6 in "Recording on an MD" on
pages 6 and 7.
The deck changes to recording pause.
2
Start playing the program source you want to
record.
The most recent 6 seconds of audio data is stored
in the buffer memory.
3
Press AMS (or T.REC) to start Time Machine
Recording.
Recording of the program source starts with the
6 seconds of audio data stored in the buffer
memory.
End of the program
source to be recorded
Time
Recorded
portion
REPEAT A˜B A.SPACE M.SCAN
/ > 25 ? ! ( )
WRITE CLEAR
NAME CHAR NUM
· P p
= + r
T.REC
T.REC MUSIC SYNC
0 )
CD-SYNC
STOP START STANDBY
CD PLAYER FADER
P = +
LEVEL