Recording From Cds; Recording Your Own Programme; Recording A Cd By Specifying Tape Length (Time Edit) - Sony CDP-CE505 Mode D'emploi

Recording from CDs

Recording Your Own Programme

You can record the programme you've created on a
tape, etc. The programme can contain up to 32 tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
PROGRAM DISC 1 – 5
Number buttons
1
Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in "Creating Your Own
Programme" on page 11.
A
The indication appears in the display.
2
When you record on both sides of the tape, press
P to insert a pause.
A B
The "P" and indications appear in the display
and the playing time is reset to "0.00."
When you record on one side of the tape, skip this
step and go to Step 4.
A pause is counted as one track
You can programme up to 31 tracks when you insert a
pause.
3
Repeat Steps 2 to 4 in "Creating Your Own
Programme" on page 11 to create the programme
for side B.
4 Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the player
pauses at the end of the programme for side A.
5
When you record on side B, reverse the tape and
press · or P on the player to resume playing.
You can check the total playing time while
programming (Programme Edit)
To select a track, press ≠ or ± and check the total
playing time. Then press PROGRAM to confirm your
selection.
To check and change your programme
See page 12.
A
The indication appears while checking the
programme for side A and
programme for side B.
· P
>10
B
while checking the
Recording From CDs Recording From CDs Recording From CDs
Recording a CD by Specifying
Tape Length (Time Edit)
You can have the player create a programme that will
fit the length of the tape.
The player automatically creates a programme,
keeping the original order of the disc.
The programme can contain up to 32 tracks (a pause
inserted between tracks is counted as one track).
Note that tracks numbered over 20 cannot be
programmed automatically.
≠/±
EDIT/TIME FADE
1
Press DISC SKIP to select the disc.
2
Press EDIT/TIME FADE repeatedly before you
start playing until "EDIT" appears and "A" in the
A
indication flashes in the display.
3
Press ≠ or ± to specify the tape length.
Each time you press these buttons, the display
changes as shown below, with the tape length of
one side following each indication.
n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N
(23.00) (27.00) (30.00)
4
Press EDIT/TIME FADE to have the player create
the programme.
The display shows the tracks to be recorded. "B" in
B
the indication flashes in the display.
5
When you record on both sides of the tape, press
EDIT/TIME FADE again.
The player inserts a pause, then creates the
programme for side B. The display shows the
programmed tracks.
When you record on one side of the tape, skip this
step.
6
Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
·
DISC SKIP
(37.00) (45.00)
(Continued)
EN
13