Locating A Particular Point In A Track - Sony MDS-JE520 Mode D'emploi

z
You can extend the playing time during music scan
1 While the deck is stopped, press MENU/NO twice to
display "Setup Menu".
2 Turn AMS to select "Setup 07", then press AMS.
3 Turn AMS to select the playing time within a range of
6 to 20 seconds (in 1 second steps), then press AMS.
4 Press MENU/NO.
z
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
z
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable disc only), or disc name (see page 19).
Locating a Particular Point in a
Track
You can also use the 0 and ) buttons to locate a
particular point in a track during playback or playback
pause.
To locate a point Press
) (forward) or 0 (backward) and
While monitoring the
sound keep pressing until you find the point.
) or 0 and keep pressing until
Quickly by observing
the display during you find the point. There is no sound
playback pause output during this operation.
z
If "—Over—" appears while you are pressing )
during playback pause
The disc has reached to its end. Press 0 (or =) or
turn AMS counterclockwise to go back.
Notes
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
Playing MDs
0/)
§
EJECT
≠ ±
AMS
0 ) r
·
P p
21 EN