Playing An Md - Sony MDS-JE520 Mode D'emploi

Basic Operations

Playing an MD

z
You can locate and play back
a track while the deck is
stopped
1 Turn AMS (or press = or
+) until the number of the
track you want to play
appears.
2 Press AMS or ·.
z
To use headphones
Connect them to PHONES jack.
Use PHONE LEVEL to adjust
the volume.
z
You can adjust the analog
signal level output to the
LINE (ANALOG) OUT jacks
1 While the deck is playing,
press LEVEL/DISPLAY/
CHAR repeatedly until the
line output adjustment
display appears.
2 Turn AMS (or press LEVEL
+/–) to adjust the output
signal level.
Notes
• The output level for the
PHONES jack is also
changed.
• When you eject the MD or
turn off the power by
pressing the 1/u switch, the
output level is reset to the
initial setting (0.0dB).
8 EN
2
STANDBY
TIMER
LEVEL/
FADER SCROLL DISPLAY/CHAR
REC OFF PLAY
PHONE LEVEL
PHONES
PLAY MODE REPEAT TIME
MIN
MAX
1
2
3
4
To
Stop playing
Pause playing
Go to the next track
Go to the current track
or the preceding track
Take out the MD
3
§
EJECT
Turn on the amplifier and set the source selector to the position
for MD deck.
Press 1/u.
The STANDBY indicator turns off.
Insert an MD.
With the arrow pointing this way
Press ·.
The deck starts playing. Adjust the volume on the amplifier.
Do the following:
Press p.
Press P. Press the button again or press
resume playing.
Turn AMS clockwise (or press + on the
remote).
Turn AMS counterclockwise (or press = on the
remote).
Press § EJECT after stopping playing.
4
REC MODE INPUT
OPT 1
STEREO
OPT 2
MONO
ANALOG
MENU/
≠ ±
NO AMS YES
REC
0 ) r
·
P p
CLEAR
PUSH ENTER
With the label side up
·
to