Caution; Maintenance And Repairs - LaCimbali M24 Utilisation Et Installation

Danger of burns
The areas marked with this sign become
hot. Great care should be taken when
in the vicinity of these areas.
GENERAL
The manufacturer disclaims all liability for
damages to items or persons due to improper
use or due to the coffee machine being used
for purposes other than its intended use.
Never operate the coffee machine with wet hands
or naked feet.
Danger of Burns
D o n o t p l a c e t h e
hands or other parts
of the body close to
the coffee distribution
points, or near to the
steam and hot water
nozzles.
If the cup heating tray is missing, DO NOT insert
your hands beneath the front panel.
Ensure that the appliance is not used by children
or persons who have not been instructed in its
correct use.
If the machine is not working properly, turn off the
machine, turn off the main off-on switch, and call
the service centre.
If the power-supply cord is damaged, switch off
the machine and request a replacement from the
service center.
To ensure safety during operation, it
is absolutely necessary to:
• follow all the manufacturer's instructions;
•
periodically check that all safety devices
are intact and functioning properly (the
purchase and every year after that).

7. Caution

Cup-warming plate
Place only coffee cups, cups and glasses to be
used in conjunction with the coffee machine on
the cup-warming plate.
Ensure that the coffee cups are completely drained
before placing them on the cup-warming plate.
No other objects shall be placed on the cup-
warming plate.
out of hours), carry out the following steps:
• Remove the plug or turn off the main
switch;
• Close the water tap.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions, damage to property and/
or injury to persons.

8. Maintenance and Repairs

repairs.
WARNING
Only use original spare parts guaranteed by
the manufacturer.
If original spare parts are not used, the
manufacturer warranty will no longer be valid.
WARNING
After maintenance, perform the installation
of the user's manual.
7 EN
WARNING: Hot surface
ACHTUNG:
ATTENTION: Surface chaude
ATTENZIONE:
MACHINE CLOSE-DOWN
When the machine is left unattended
for a prolonged period (for example
WARNING
jeopardize the safety and conformity of
the machine.