Caution; Maintenance And Repairs - LaCimbali M26 Utilisation Et Installation

Masquer les pouces Voir aussi pour M26:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 79

7. Caution

Danger of burns
The areas marked with this sign become
hot. Great care should be taken when
in the vicinity of these areas.
GENERAL
The manufacturer disclaims all liability for
damages to items or persons due to improper
use or due to the coffee machine being used
for purposes other than its intended use.
Do not operate the coffee machine with wet hands
or bare feet.
Ensure that the appliance is not used by children
or persons who have not been instructed in its
correct use.
Danger of Burns
Do not place the hands or other parts of the body
close to the coffee dispensing groups, or near to
the steam and hot-water nozzles.
Cup-warmer tray
Place only coffee cups, cups and glasses to be
used in conjunction with the coffee machine on
the cup-warmer tray.
Ensure that the coffee cups are completely
drained before placing them on the cup-warmer

8. Maintenance and Repairs

If the machine is not working properly, turn off the
machine, turn off the main off-on switch, and call
the service centre.
If the power-supply cord is damaged, switch off
the machine and request a replacement from the
service centre.
To ensure safety during operation, it
is absolutely necessary to:
follow all the manufacturer's instructions;
periodically check that all safety devices
are intact and functioning properly (the
purchase and every year after that).
02_M26_UNICO_1817.indd 8
WARNING: Hot surface
ACHTUNG:
ATTENTION: Surface chaude
ATTENZIONE:
tray.
No other objects shall be placed on the cup-
warmer tray.
MACHINE CLOSE-DOWN
When the machine is left unattended
for a prolonged period (for example
out of hours), carry out the following steps:
Clean as indicated in the dedicated
chapter;
Remove the plug or turn off the main off-
on switch;
Close the water tap.
N O T E : f o r m a c h i n e s w h i c h c a n
be programmed to switch on and off
automatically, the power must be left on
only if this function is active.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions, damage to property and/
or injury to persons.
WARNING
can jeopardize the safety and conformity
of the machine.
repairs.
WARNING
Only use original spare parts guaranteed by
the manufacturer.
If original spare parts are not used, the
manufacturer's warranty will no longer be
valid.
WARNING
After maintenance, perform the installation
of the user's manual.
8 EN
03/05/2018 16:48:15

Publicité

Table des Matières
loading

Table des Matières