Service Time Menu; Date And Time - LaCimbali M26 Utilisation Et Installation

SERVICE TIME MENU

Pressing the key, the following message will appear
on the display:
SERVICE TIME

DATE AND TIME

ON
OFF
Day off
Energy Saving
- ON time
- OFF time
- day off
General indications
If there is no day off (i.e. the enterprise never closes),
enter "none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
- Energy Saving (enable/disable the Energy Saving
- Night ON (start time for evening beverage price: only
- Night OFF (end time for evening beverage price: only
DATE AND TIME
To modify the date and hour, press the
corresponding line. The following message will appear:
DATE AND TIME
Year
M
D
Hour
Minutes
02_M26_UNICO_1817.indd 33
+
none
YES
key on the
+
17
SEP
WED
17
12
33 EN
- Wash (hour of scheduled wash
Washing cycle can be performed at pre-set time. At the
set time, the display will show: this message "EXECUTE
COFFEE WASHING".
When requested, a washing cycle (simultaneous or
sequential) will be performed as described in the "Cleaning
Operations" paragraph.
Follow these steps to set the time for the washing cycle:
- Position the cursor on the line WASH
- Press the
- Change the time, using the
- Press the
Set OFF against the time so as to not activate these wash
cycles.OFF is displayed press the
NOTES. The technical personnel has the ability to enable
or disable the "block" function.
With "block" enabled, if the washing cycle is not performed
within an hour, the machine prevents beverages from
being dispensed.
- Water Change water replacement can be set by time
The "Water Change" function with time request is set by
the technical personnel who can also enable or disable
the "block" function.
With "block" enabled, if the water change is not done
within an hour, the machine prevents beverages from
being dispensed.
With request scheduled the user can only change the
time the request appears.
Follow these steps to set the time:
- Position the cursor on the line Water Change
- Press the
- Change the time, using the
- Press the
Use the and keys to move the cursor (black line)
cursor will turn into an arrow è and it becomes possible
to change the number for the selected entry by using the
and keys.
Once the operation is completed, press the
Note: the cursor changes back to black line.
Repeat the operation described above to modify
other parameters.
and
key the indicated
and
key. The
key to
03/05/2018 16:48:38