Service Time Menu; Date And Time - LaCimbali S39 TE Utilisation Et Installation

Pressing the PRG (29), the following message will
appear on the display:
SERVICE TIME

DATE AND TIME

ON
OFF
Day off
Night ON
- ON time
- OFF time
- day off
- Night ON (start time for evening beverage price: only
- Night OFF (end time for evening beverage price: only
- Wash 1 (request - every 24 hrs - at the programmed
- Wash 2 ÷ 5 (hour of scheduled washes from 2 to 5)
General indications
If there is no day off (i.e. the enterprise never closes),
enter "none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
To modify the date and hour, press the PRG
the corresponding line. The following message will appear:
DATE AND TIME
Year
M
Date
Hour
Minutes

Service time menu

+
none
Date and time
(29) key for
+
14
APR
23 WED
17
12
24 EN
"WASH 1" AND "WASHES 2 ÷ 5"
These are scheduled washes that are independent of the
wash cycles related to the switching on and switching off
phases.
At the set hour, the messages "EXECUTE WASHING
GROUP", "EXECUTE WASHING MILK CIRCUIT",
"EXECUTE SHORT WASHING" appear, according to the
programmed washing.
After having positioned the cursor on the line to be changed
and after having pressed the PRG
the value using the "+"
press the "OK
Repeat the above operations to change the other wash
scheduling times.
"Wash 1"
When this function is requested, a long wash cycle is
performed (milk circuit and coffee circuit) as described in
the "Cleaning operations" paragraph.
NOTE: Wash 1 cannot be disabled. It is requested daily at
the programmed hour, and always within 24 hours.
"Washes 2 ÷ 5"
When these functions are requested, they can either be
a long or short wash cycle depending on how they were
programmed.
If the set hour for these wash cycles occurs when the
machine is switched off, the request will be canceled.
NOTE: Set OFF against the time so as to not activate these
wash cycles.
OFF is displayed press the "-"
For more details, please consult the technical manual at
Use the "+" (30) and "-"
(29) key. The cursor will turn into an arrow
becomes possible to change the number for the selected
entry by using the "+"
Once the operation is completed, press the
Note: the cursor changes back to black line.
Repeat the operation described above to modify other
parameters.
(29) key, change
(30) and "-" (31) keys. Then
(31) key the indicated
(31) keys to move the cursor
(30) and "-" (31) keys.
key to
PRG
and it