Milk Circuit Wash With Liquid Detergent - LaCimbali S39 TE Utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 68
Milk requires total hygiene.
Therefore, clean thoroughly as indicated.
1) The message "EXECUTE WASHING MILK CIRCUIT"
appears on the display at the set hour.
2) Position the vessel under the hot-water outlet and under
the coffee/cappuccino delivery spout of the machine
(adjusting height if necessary).
check that the vessel is underneath the milk dispensing
nozzle ONLY.
3) Remove the suction tube from the milk container and
insert into the vessel connection.
4) Fill a container with one dose of liquid detergent (see
product instructions).
5) To perform the wash cycle keep the milk wash key (28)
pressed on the selection keypad. The message "MILK
WASHING" appears on the display.
The washing solution, aspirated and heated, travels
through the milk circuit several times, washing the circuit
and inside the cappuccino maker.
6) The washing cycle ends when the "WASH MILK" message
is NO LONGER on the display.
7) Remove the milk suction tube form the vessel connection
and reposition inside the milk container.

Milk circuit wash with liquid detergent

1
2
3
4
5
6
7
18 EN
EXECUTE WASHING
MILK CIRCUIT
YES
MILK
50 ml l
EXECUTE WASHING
MILK CIRCUIT
MILK WASHING
MILK WASHING
NO
MILK

Publicité

Table des Matières
loading

Table des Matières