Clock Adjustment; How To Access The Programming Mode - LaCimbali M26 Utilisation Et Installation

20. Clock adjustment

Use the and keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys (
hours setting increases (or decreases).

21. How to access the programming mode

N.B. ONLY if the item "Customer Progr." is set on
"YES" and the item "Program. block" is set on
"NO".
To access programming press the
message will appear on the display:
CUSTOMER PROG.
KEY MENU
WASHING
DATA MENU
CUSTOMER
Use the and keys to position the cursor (black line)
on the desired line, then press the
Always use the and
this point there are two possibilities:
2) exit the menu and leave the settings unchanged by
pressing the key.
02_M26_UNICO_1817.indd 29
or ) is pressed and held down for
key.
wednesday
Note: When modifying data, the cursor changes to "
", or a slide bar with maximum and minimum
settings will appear:
-
key
S
15:18:12
+
03/05/2018 16:48:36