Clock Adjustment; Customer Parameters Menu; Language Selection - LaCimbali M34 SELECTRON Utilisation Et Installation

Use the "+" (30) and
the clock.
The time increases (or decreases) one minute
each time the key is pressed.
If one of the keys ( 30 or
for more than 10 seconds, the minutes setting stops and
the hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
To access "Customer parameters" press
following message will appear on the display:
To display the messages in a different language from that
set, after entering into Programming mode, position the
cursor on the desired language by pressing the
and "-" (31) keys and then pressing the
(29). The machine will restart with the messages provided
in the selected language.
The display (16) provides a choice of the following
languages.:
Italian, English, French, German, Dutch, Spanish,
Portuguese, Japanese and Russian.

19. Clock adjustment

"-" (31) keys to adjust
31) is pressed and held down

20. Customer parameters menu

key (34

Language selection

"+" (30)
"PRG" key
12
wednesday
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
FRANCAIS
DEUTSCH
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
FRANCAIS
DEUTSCH
22 EN
March 2014
15:18:12
+
+