Control Horn And Servo Arm Settings - Horizon Hobby E-FLITE P-47 Thunderbolt Manuel D'utilisation

Model Assembly Continued
Optional Belly Skid Installation
Attach the clear plastic belly skid to the bottom of the fuselage using double-
sided tape as shown.
The belly skid is recommended if fl ying without landing gear.

Control Horn and Servo Arm Settings

The table to the right shows the factory settings for the control horns and servo
arms. Fly the aircraft at factory settings before making changes.
NOTICE: If control throws are changed from the factory settings, the AR636
gain values may need to be adjusted. Refer to the Spektrum AR636 manual for
adjustment of gain values.
After fl ying, you may choose to adjust the linkage positions for the desired
control response. See the table to the right.
Horns
Elevator
Ailerons
Flaps
Rudder
Tail Wheel
More control throw
Arms
Less control throw
EN
7