Napoleon Tall Linear Vector Serie Manuel D'installation page 33

5.1 firestop spacer assembly
1. Install standoffs onto the firestop spacer (Fig. 1).
2. Install one vent shield onto the standoff on one side of the firestop spacer (Fig. 2).
3. Install the other vent shield on the opposite side of the firestop spacer (Fig. 3).
Firestop spacer /
Espaceur coupe-feu
Standoff /
Espaceur
Dimples /
Fossettes
Standoff /
Espaceur
Side view
4. Roll the vent sleeve as shown and ensure to clip the ends together (Fig. 4).
5. Ensure both ends line up and secure ends with clip and fasteners (Fig. 5).
Fig. 1
venting installation
Fig. 2
Fig. 5
W415-4127 / B-0 / 03.25.24
EN
Type 1 (x18)
Fig. 3
Fig. 4
33