Exchanging The Uv Lamps - SilverCrest SNS 45 A2 Mode D'emploi

Exchanging the UV Lamps

DANGER
Potentially fatal risk of electrical shocks!
► Disconnect the plug from the mains power socket before you start with the
exchange of the UV lamps!
NOTICE
► The UV lamps may ONLY be replaced with lamps of the same type. The speci-
fi cations for the precise lamp type are given in the chapter "Technical Data".
Unscrew the two screws on the sides of the appliance with a cross-head
screwdriver.
Pull the front appliance cover with the ultraviolet lamps carefully from the
appliance, thereby paying heed to the cable connection on the side.
Carefully pull the defective UV lamp out of its socket.
Insert the new UV lamp into the socket.
Slide the appliance cover with the UV lamps back onto the appliance, thereby
ensuring that the cable connection on the side does not get snagged or trapped.
Re-attach the appliance cover with the two side screws.
SNS 45 A2
GB
83