Skin Care After Application; Cleaning And Maintenance Of The Device - SilverCrest SHE 3 C3 Mode D'emploi

All manuals and user guides at all-guides.com
__NAS279064_Hornhautentferner_B2.book Seite 67 Mittwoch, 9. November 2016 2:15 14

7.2 Skin care after application

• Apply body lotion, oil or cream to the skin.
• Do not apply any substances (e.g. deodorant) to the treated
areas, which could irritate the skin.
8. Cleaning and maintenance of the
device
WARNING!
Do not switch the device on if the roller unit has been re-
moved.
Do not use any astringent or abrasive cleaning agents.
None of the parts may be cleaned under water.
After every application
• Clean the roller holder 2 and the roller 1/8 after every ap-
plication.
1. Switch off the device.
2. Clean the roller holder and the rollers with the brush 10 af-
ter every application.
3. Place the protective lid 9 on the roller holder 2.
From time to time
• Wipe down the housing of the device with a damp cloth
when necessary.
• Check whether the surface of the roller 1/8 is undamaged.
To do so, turn the roller and check the surface carefully.
67
GB