Post Flight; Troubleshooting Guide As3X - Horizon Hobby E-Flite Pawnee Brave Night Flyer Manuel D'utilisation

Masquer les pouces Voir aussi pour E-Flite Pawnee Brave Night Flyer:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

Post Flight

Disconnect the fl ight battery from the ESC (Required for Safety
1
and battery life).
2
Power OFF the transmitter.
3
Remove the fl ight battery from the aircraft.
4
Recharge the fl ight battery.

Troubleshooting Guide AS3X

Problem
Damaged propeller or
spinner
Imbalanced propeller
Motor vibration
Oscillation
Loose receiver
Loose aircraft controls
Worn parts
Irregular servo movement
Trim is not at neutral
Sub-Trim is not at neutral
Inconsistent fl ight
performance
Aircraft was not kept im-
mobile for 5 seconds after
battery connection.
Incorrect response
Incorrect direction settings
to the AS3X Control
in the receiver, which can
Direction Test
cause a crash
14
Possible Cause
Replace propeller or spinner
Balance the propeller. For more information, view our propeller balancing video on Horizon Hobby's You-
tube channel https://www.youtube.com/watch?v=OXuNnYQO2s4
Replace parts or correctly align all parts and tighten fasteners as needed
Align and secure receiver in fuselage
Tighten or otherwise secure parts (servo, arm, linkage, horn and control surface)
Replace worn parts (especially propeller, spinner or servo)
Replace servo
If you adjust trim more than 8 clicks, adjust the clevis to remove trim
No Sub-Trim is allowed. Adjust the servo linkage
With the throttle stick in lowest position. Disconnect battery, then reconnect battery and keep the aircraft
still for 5 seconds
DO NOT fl y. Correct the direction settings (refer to the receiver manual), then fl y
5
Repair or replace all damaged parts.
Store the fl ight battery apart from the aircraft and monitor the
6
battery charge.
Make note of the fl ight conditions and fl ight plan results, planning for
7
future fl ights.
Solution

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Efl6950

Table des Matières