Post Flight Checklist - Horizon Hobby Revolution ASCENT MTX Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Landing
1. Fly downwind and reduce the throttle to 25% to begin the descent.
2. Begin turning towards the runway, heading into the wind.
3. Reduce the throttle to 0% and glide onto the runway.
• If you are going to land short of the runway, add a little throttle to extend the glide.
• If you are going too fast to land, go around and try again.
CAUTION: Never catch a flying aircraft in
your hands. Doing so could cause personal injury
and damage to the aircraft.

Post flight Checklist

1.
Lower throttle to 0%
2.
Disconnect and remove the flight
battery
3.
Power off the transmitter
4.
Fully charge the flight battery
NOTICE: When you are finished flying, never
leave the aircraft in direct sunlight or in a hot,
enclosed area such as a car. Doing so can
damage the foam.
3
2
5.
After charging is complete, remove
the battery and store in a safe place
6.
Inspect airframe and make any
repairs
7.
Store in the original product box
NOTICE: Always disconnect the battery from the
aircraft before powering off the transmitter or
injury and damage may result.
9
1
3
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ascent micro twin x rtfRvof1100

Table des Matières