Horizon Hobby Revolution ASCENT MTX Manuel D'utilisation page 8

EN
Aircraft Trim
If the aircraft's nose drifts left or right while the
steering stick is at neutral (centered) press the
steering trim buttons as shown in the chart to the
right to correct the drift.
The Ascent MTx can also be trimmed by carefully
bending the control surfaces molded into the tail as
shown below.
1. Center the transmitter trims.
2. Carefully bend the control surface in the direction
shown in the chart to the right.
NOTE: Only make small adjustments to the control
surfaces. Avoid making large changes as this could
affect flight performance.
When you notice any reduction of power or 10
minuets have elapsed, immediately land the aircraft
and recharge the battery.
Direction of Drift
Direction of Drift
8
Button to Correct
Bend Direction