Wing Assembly; Wing Installation - Horizon Hobby E-Flite Pawnee Brave Night Flyer Manuel D'utilisation

EN
Model Assembly Continued

Wing assembly

1. Slide the left and right wing halves together, as shown (fi gure A).
2. Ensure the internal wing lights connectors (JST type connector), aileron
servo connectors and navigation light connectors are aligned with the hole
(B) created by the two connected wing halves.

Wing Installation

1. Remove the battery hatch by pushing the retaining latch forward
and pulling up on the backside of the hatch.
6
A
B
Continued