Bosch BDU280P Mode D'emploi page 65

English – 8​
The USB port is reserved for connecting diagnostic
systems. The USB port does not have any other func-
tion.
The USB port must always be completely sealed
u
with the protective cap (8).
Action
Switch on on-board computer
Switch off on-board computer
Increase assistance
Decrease assistance
Display TRIP, TOTAL,
RANGE, assistance modes
Switch on bike lights
Switch off bike lights
Reset trip distance
Activate push assistance
Implement push assistance
Switch from kilometers to
miles
Display the versions
A)B)
Adjust display brightness
A) The eBike system must be switched off.
B) The information is shown as scrolling text.
C) The display must be switched off.
1 270 U020 XBP | (14.02.2019)
Buttons Duration
As required
As required
+
–
–
+
+
– +
WALK 1.
+ 2. As re-
quired
– 1. Keep
pressed
2.
– + 1. Keep
pressed
2.
C) – + 1. Keep
pressed
2.
– or +
EN-61
Bosch eBike Systems