Bosch BDU280P Mode D'emploi page 115

Masquer les pouces Voir aussi pour BDU280P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

the rider is prompted to press the
+ button (14) for two seconds.
After two seconds, the push assis-
tance mode is displayed.
This indicator and the text shown
!
on the left appear when there are
problems that mean that the drive
unit cannot provide any assis-
ENGINE OFF
tance. This is the case if, for ex-
48
ample:
KM
D I S A B L E D
18
%
– Incompatible components are
connected to the system; or
– The eBike battery is empty.
If the eBike battery is being
68%
charged, the screen shows the
current state of charge. The bat-
tery symbol flashes.
This indicator appears when the
eBike is connected to the Diag-
nosticTool.
If the state of charge of the eBike
48
24
5
KM
battery is below 20 %, the battery
18
KM/H
%
!
charge indicator h will flash.
This indicator appears when the
state of charge of the eBike bat-
tery is low. The assistance is
switched off.
These indicators appear when the
eBike is due for servicing.
INSPECTION DUE
This indicator appears if software
x x
problems occur. A software up-
___
date must be carried out.
This indicator appears when the
SmartphoneHub is connecting to
the smartphone.
The completion of the Bluetooth®
pairing is indicated by means of a
Bosch eBike Systems
check mark against the small
smartphone symbol.
This indicator appears whenever
the SmartphoneHub is in recovery
mode (only in this status can new
software be installed). The small
smartphone symbol indicates the
connection to the smartphone.
The completion of the recovery
operation is indicated by a check
mark.
Your operating system is non-
functional for the following rea-
sons:
1. One or more incompatible
CHECK APP
components have been de-
tected. In this case, the compo-
nents require a software up-
date that can only be imple-
mented by a Bosch eBike
dealer. Following this notifica-
tion, the eBike system
switches off.
2. An out-of-date version of the
software has been detected.
This can only occur as a result
of a hacking attempt. The prob-
lem can be resolved with a soft-
ware update. Following this no-
tification, the eBike system
switches off.
English – ​ 1 1
EN-111
1 270 U20 XBC | (09.04.2019)

Publicité

Table des Matières
loading

Table des Matières