Pedal Bar Installation; Initial Use; Switching On; Welcome - B.A. International Powersurge LED Manuel D'utilisation

C
Guide the irrigation line along the micromotor
cable using the attachment clips as follows

4.6 Pedal bar installation

1. Remove the two screws having discs.
2. Insert the bar in accordance with the illustration.
3. Replace the screws + discs and screw moderately.

5. Initial use

E
One must be familiar with all the safety instructions before installing
and using the device (see section E « 2 – Safety » ).

5.1 Switching on

Put the supply switch in the I position

5.2 Welcome

The welcome screen allows the selection of the user or the wished protocol.
This is the description of the welcome screen according to the representation
Fig. 1
6
Version : ANT01.1y/01.3v/01.3v/01.2a
1
2
(Fig.A, rep.9).
4
1
3
2
B.A.
5
BA Powersurge
Premium
Fig.1 :
1. Users or Protocols.
2. Button and name of selected user/ protocol.
3. User button / Inactive protocol.
4. Access settings.
5. Validation button for user selection.
6. Software version.
If the LCD screen does not come on, see section
« 11 – Abnormalities and errors » .
3
11