Restoring Previous Configuration / Saving Current Configuration; Software Update - B.A. International Powersurge LED Manuel D'utilisation

18

7.6 Restoring previous configuration / Saving current configuration

This function saves all the customisation done in order to be able to subsequently restore it.
The following can then be saved :
w Various users, protocols and sequences created with the associated parameters.
w Various adjustments made.
Connect the USB key to the rear side of the box.
Press the « settings » button
Press the button
Select the desired button : « restore » or « save ».
Validate to return to the « settings » screen.

7.7 Software update

The update files must be registered on the USB key in an index named « ImplMotUpdate ».
Connect the USB key to the rear side of the box.
Press the « settings » button
Press the button (Fig.9, rep.10).
Validate to return to the « settings » screen.
C
Updating the motor does not result in the deletion of any previously configured parameters.
7.8
B.A. INTERNATIONAL
Press the « settings » button
Press the button
Validate to return to the « settings » screen.
(Fig.1, rep.4 or Fig.3, rep.11).
(Fig.9, rep.9).
(Fig.1, rep.4) or (Fig.3, rep.11).
initial configuration
(Fig.1, rep.4) ou (Fig.3, rep.11).
(Fig.9, rep.11).