Using The Device; Storage Conditions - B.A. International Powersurge LED Manuel D'utilisation

6
DANGER
E Do not use this product in facilities that are at risk of explosion.
Do not expose the device to water projections or water spray.
Do not insert metal items in the device in order to avoid the risk of electrical shock, short-circuit or the emission
of dangerous substances.
DANGER (ELECTROCUTION)
E
Accidental leak of fl uid into the box.
Check and ensure the water tightness of containers and pipes before each use. Should fl uid leak into the device,
do not touch it and immediately disconnect the electricity supply cable. Ensure that the surface of the device
is completely dry before re-connecting the electricity cable.

2.3.4 Using the device

ATTENTION
E Do not move the device when in use.
We strongly recommend that torque is restricted so as not to exceed the manufacturer's recommendations for the
instruments. This is to reduce the risk of injury and instruments being damaged.
When the micromotor rotation direction is changed, this is recorded.
WARNING
E
Switch the device off as soon as the treatment is fi nished.
Disconnect it from the electricity supply when not in use for a long time.
ATTENTION
E
There are mobile parts in the peristaltic pump.
Do not insert fi ngers inside the pump cabinet.

2.3.5 Storage conditions

ATTENTION
Recommended conditions : keep away from humidity and in ambient temperature.
E
Keep away from the sun, sparks and all sources of ignition.
Temperature : from -20°C to 70°C.
Air humidity levels : from 5 % to 95 %.
Incompatible materials : acids and other solvents.
2.3.6 Malfunction
In the event of malfunction (screen that glistens, noisy pump motor, vibration in the micromotor) :
w Immediately stop using the device.
w Try to locate or eliminate the problem using the description (section « 11 – Abnormalities and errors » ).