Guarantee; Manufacturer's Responsibility - B.A. International Powersurge LED Manuel D'utilisation

The Powersurge unit is intended to be used in the electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the
between the portable and mobile RF communications device (emitters)and the
to the maximum emission power of the communications device.
Maximum output
power assigned
for the emitter W
0,01
0,1
1
10
100
For emitters whose maximum emission power assigned is not given above, the recommended separation distance d in meters
(m) can be estimated by using the equation applicable to the frequency of the emitter, where P is the characteristic of the power of
maximum emission of the emitter in watts (W), according to the manufacturer of the latter.
NOTE 1 : to 80 MHz and at 800 MHz, the separation distance for the highest frequency range applies.
NOTE 2 : these directives do not apply in all situations. Electromagnetic propagation is affected by absorption and by the refl ections
of structures, objects and individuals.
13. Garantee
12 month GUARANTEE.
• This device is guaranteed parts and labour against all manufacturing defects for 12 months from the date of invoice.

GUARANTEE

• This guarantee does not apply to wear and tear parts.
12
• All changes or additions to the product without the express agreement of
month
• The guarantee becomes null and void if the technical instructions are not followed.
•
B.A. INTERNATIONAL
or incorrect maintenance, the non-observance of instructions for use or connection, scaling or corrosion, impurities in the water supply
system or unusual chemical or electrical infl uences or non observance of the instructions, maintenance instructions and assembly of
and other manufacturer's instructions.
INTERNATIONAL
• In order that guarantee requests are taken into consideration, please attach a copy of the invoice or a copy of the delivery slip to the device.

14. Manufacturer's responsibility

This leafl et does not substitute leafl ets for peripheral products.
The manufacturer reserves the right to change the device and/or the user manual without warning.
E
The following points, if they are not followed, relieve
w All the manufacturer's recommendations must be followed during installation (network voltage,
electromagnetic environment...).
w The device must be used in an electrical facility compliant with current regulations.
Recommended separation distances between portable
and mobile RF communications devices and the Powersurge
Powersurge unit can help to prevent electromagnetic interference by keeping a minimum distance
Separation distance according to the frequency of the emitter (m)
From 150 kHz to 80 MHz
d=1,2√P
0,12
0,38
1,2
3,8
12
cannot be held responsible for damage resulting from or which could result from normal wear, use, cleaning
BA Powersurge
Premium
Powersurge unit, as recommended below, according
From 80 MHz to 800 MHz
d=0,4√P
0,04
0,13
0,4
1,3
4
B.A. INTERNATIONAL
of the responsibility :
B.A. INTERNATIONALE
From 800 MHz to 2,5 GHz
d=0,7√P
0,07
0,22
0,7
2,2
7
render this guarantee null and void.
B.A.
25