Adjustments; Pedal Calibration; Touch Pad Calibration - B.A. International Powersurge LED Manuel D'utilisation

Connect the 1/20 contra-angle (equipped with the specifi c connection tool) to the motor.
Important : do not connect the calibration module at this stage. The motor must fi rst perform a no-load test.
When the contra-angle is connected, press the pedal lever. The no-load test is run. The motor increases in speed for
approximately 10 seconds. At the end of this fi rst test, a screen is displayed asking you to connect the contra-angle load
module. When connected, validate again using the pedal lever. The load test is run correctly. Maintain the tool calibration
module connection correctly. The motor increases in speed for approximately 10 seconds.
When it is terminated, the motor stops automatically and the screen displays « contra-angle calibrated ».
You are then automatically returned to the main parameterization screen. Your contra-angle is now calibrated.
E
After being used 100 times or after 2 years of running, the calibration device has to be returned to the
After-Sales Service. It will then be checked and restandardized by

7.3 Adjustments

It is possible to adjust the light intensity of the contra-angle, the sound, to manage the alarms and the temporizations
with the following procedure :

7.4 Pedal calibration

Press on the button « settings parameters »
Press on the button
Keep on pressing on the pedal's lever and press on the button « validate »

7.5 Touch pad calibration

If the touch pad is not working, it may need to be adjusted.
To do this :
Press the « settings » button
Press the button
Press on the indicated areas.
Press the button « adjusting parameters »
Press on the button of your choice
Press on the buttons
Press on the button .
(Fig.1, rep.4) or (Fig.3, rep.11).
(Fig.9, rep.7).
When it is terminated, a screen displays « calibration successful »
(Fig.1, rep.4) or (Fig.3, rep.11).
(Fig.9, rep.8) to access the touch pad calibration screen.
When it is terminated, a screen displays « calibration successful »
BA Powersurge
Premium
B.A. INTERNATIONAL
(Fig.1, rep.4 or Fig.3, rep.11).
(Fig.9, rep.4 or Fig.9,rep.5 or Fig.9,rep.6).
and/ or move the cursor on the bargraph.
B.A. INTERNATIONAL
.
17