Vetus STE5512D Manuel D'utilisation page 17

125 kg, 160 kgf
• In turn remove the propeller (1), the key (2) and the V-ring (3).
• Clean the propeller shaft and grease the running surface of the
V-ring with 'outboard gear grease' .
• Fit a new V-ring.
For the art. code for the V-ring, see page 90 - 95.
• Put the key back in the shaft and refit the propeller.
Six weeks after installation and at least once annually thereafter,
be sure to check all of the electrical connections between the bat-
tery/batteries and the bow thruster, as well as the connections on
the motor relays.
If they have been loosened previously, prevent the nut and bolt from
turning while connecting the main power supply cables. This is also
why you should always use a second wrench when tightening bolts.
The instructions of the manufacturer should be followed for the
maintenance of the batteries. Vetus batteries are maintenance free.
vetus® Operation manual Retractable Thrusters
3
M16 24
1
20 - 25 Nm
5
M6
5 - 6 Nm
ENGLISH
2
Outboard Gear
Grease
17
020584.02