Publicité
Les langues disponibles
Les langues disponibles
13.7
Hazard warnings
Despite its intended use, certain residual risks remain:
•
Risk of injury to fingers and hands from the rotating blades if the workpiece is guided
improperly.
•
Injuries caused by the workpiece being thrown away by improper mounting or guidance, such
as working without a stop.
•
Danger to health from wood dust or chips. It is essential to wear personal protective
equipment such as eye protection and a dust mask. Use a dust collection system!
•
Injuries due to defective blades. Check the saw blade regularly for damage.
•
Risk of injury from tools, especially when changing tools.
•
Risk of injury due to kick back of the workpiece.
•
Risk of electric shock if incorrect electrical connections are used.
Residual risks can be minimized if the "Safety instructions" and the "Intended use" as well as the
operating instructions are observed.
Due to the design and construction of the machine, hazardous situations may occur when handling
the machines, which are identified as follows in this operating instruction:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, weight, means of transport to be used and the prescribed
transport position, etc. Lifting and transporting the machine may only be carried out by qualified
personnel with appropriate training for the lifting equipment used.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
D AN G E R
WAR N I N G
C AU TI O N
N O TE
HOB305PROSMW2_230V | HOB305PROSMW2_400V
TRANSPORT
34
Publicité
