Beta Motorcycles EVO 4T EUROPA Mode D'emploi page 131

4
HEADLIGHT
Keep the headlight glass clean at all times
(page 61).
REPLACING THE HEADLIGHT
BULBS
1
1Nm
Dismantle the headlight mask removing
the two retaining screws 1 indicated in
the figure.
To replace the high/low beam bulb, pro-
2
ceed as follows:
lift rubber cap 2.
Turn bulb holder 3 anticlockwise and
3
remove the bulb holder from the headlight
body.
Turn the bulb counterclockwise with respect
to the bulb holder.
Replace the bulb.
To reassemble the bulb and bulb holder,
proceed in reverse order with respect to
disassembly.
GB
59