Maintenance And Cleaning; Environmental Instructions And Disposal Information; Information About Warranty And Service Processing - Parkside PISG 80 A1 Traduction Des Instructions D'origine

... / Maintenance ... / Environmental instructions ... / Information about warranty ...
Weld penetration
Weld width
Welding bead
Weld imperfections
Note: Determine which welding method is more
suitable for yourself after welding a test piece.

Maintenance and Cleaning

Note: The welding tool requires regular maintenance
and reconditioning to work properly and to comply
with safety requirements. Improper and incorrect
operation may result in malfunctions and damage
the tool.
Switch off the main power supply and the main
switch on the device before maintaining or re-
pairing the welding tool.
Regularly clean the inside and outside of the
welding tool. Remove dirt and dust inside the
device with air, steel wool, or a brush.
Current regulators, earthing equipment, internal
cables, the blowpipe coupler and adjusting
screw should be maintained regularly. Tighten
loose screws and replace rusty screws.
Regularly check the leakage resistance of the
welding tool. Use suitable measuring instruments
for this purpose.
In the event of a defect or if components need
to be replaced, please contact the correspond-
ing professional.
Towards the unwelded
part:
less
larger
flatter
greater
Environmental instructions
and disposal information
Do not dispose of the inverter welder equipment with
your household waste, or throw into fire or water. If
possible, non-operational equipment should be re-
cycled. Contact your local retailer for information.
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is
3 years from the date of purchase. In the event of
product defects, you have legal rights against the
retailer of this product. Your statutory rights are not
limited in any way by our warranty detailed below.
Towards the welded part:
greater
smaller
higher
less
Don't waste,
recycle!
Device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
GB/IE 31