Using On Slopes - Stiga MPST 84 Li 48 V1 Manuel D'utilisation

Masquer les pouces Voir aussi pour MPST 84 Li 48 V1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Status
Machine turned on or in motion.
Operator seated.
Drive pedal in forward or 
reverse position.
Emergency push-button activated.
Cutting means engaged.
Cutting means engaged.
Machine turned on and in motion.
Machine turned on and in motion.
DANGER
If any of the results fail to match the indications 
provided in the tables, do not use the
machine. Contact a service centre to have 
it checked and repaired if necessary.
NOTE
Always bear in mind that the safety devices 
prevent the electric motor from starting if safety 
requirements have not been met. In these cases, 
once the start consent has been reinstated,
the key (Fig. 11.A) must be returned to the stop 
position before the machine may be restarted.
Action
The operator gets up from the seat.
Try to
start the machine
Try turning on the machine.
The reverse gear is engaged without 
holding down the consent push-
button for cutting in reverse gear.
The grass catcher is lifted or the
rear discharge guard is removed 
(only for rear collection models).
The drive pedal is released.
Test drive.

7.3 USING ON SLOPES

Comply with the limits indicated in the 
"Technical Data" Tables ad in "fig. 17" 
regardless of the mowing direction.
Remember there is no such thing as a "safe" 
slope. Driving on grass slopes requires 
particular care. To prevent overturning
or loss of control over the machine:
• Never mow across the face of the slope. 
EN - 16
All services are deactivated
[Push-button panel Type I]
The icon fig. 12.E flashes.
[Push-button panel Type II]
The icon fig. 12.E flashes and 
the icon fig. 12.P. lights up.
The machine is turned on.
[Push-button panel Type I]
The icon fig. 12.E flashes. 
[Push-button panel Type II]
The icon fig. 12.E flashes and 
the icon fig. 12.O. lights up.
The machine is turned on, but 
the drive pedal and the push-
button to engage the cutting
means are not functioning.
The cutting means disengage.
The cutting means disengage.
The machine slows down and stops.
No abnormal vibration or unusual 
sound, the steering, the controls and
the pedals are operating normally.
Lawns on a slope have to be mowed 
moving up and down and never across 
them, in forward drive, paying attention 
to the changes of direction, making sure 
that the wheels facing the slope do not hit 
any obstacles (such as stones, branches, 
Result

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mpst 84 li 48 v2Mps 84 li 48 v1Mps 84 li 48 v2Mpns 84 li 48 v1Mpns 84 li 48 v2Mp 84 li 48 v1 ... Afficher tout

Table des Matières