Maintenance Table - Stiga MPST 84 Li 48 V1 Manuel D'utilisation

• Incorrect use or assembly or
prohibited by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare
parts (adaptable parts).
• Use of attachments not supplied or
approved by the manufacturer.
The warranty does not cover:
• The routine/extraordinary maintenance
operations (described in the instruction manual).
• Normal wear and tear of consumables,
such as cutting means, wheels,
headlights, safety bolts and cabling.
• Normal wear and tear.

14. MAINTENANCE TABLE

The boxes at the side are for you to mark the date or number of
working hours at which the maintenance was made.
Intervention
Check all fasteners
Tyre pressure check
Safety checks/controls check
Transmission release lever check
Assembly/Checking of outlet guards
Battery power reserve
General cleaning and inspection
Checking for accidental damage to
the machine. If necessary, contact
the authorised service centre.
cutting means positioning
and sharpening check
Replacing cutting means
General lubrication
* This operation must be carried out by your Dealer or a specialized Centre.
** General lubrication of all joints should also be carried out whenever
the machine is to be left unused for a long period.
• Deterioration in the appearance
of the machine due to use.
• Cutting means supports
• Any ancillary expenses related to the
enforcement of the warranty, such as costs
incurred to travel to the user's location,
transfer of the machine to the Dealer, rental of
replacement equipment or calling of independent
enterprises to perform maintenance work.
The user is protected by his or her own national
legislation. The purchaser's rights under the
national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
(hours)
Before each use
Before each use
Before each use
Before each use
Before each use
Before each use
After each use
Before storage
After each use
After each use
25
100
25
EN - 25
Completed (Date or Hours) Notes
par. 7.1.3
par. 7.2
par. 6.4
par. 5.5
par. 8.2
par. 8.4
*
*
par. 8.5 **