Télécharger Imprimer la page

AL-KO GT 2025 Traduction De La Notice D'utilisation Originale page 45

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
Installation
Children must be supervised
and instructed so they do not
play with the appliance.
Dry unused appliances and
store in a closed place. Unau-
thorised persons and children
must not have access to the
appliance.
4 INSTALLATION
WARNING!
Danger if assembly is
not carried out com-
pletely!
Operation of an incom-
pletely assembled appli-
ance can result in serious
injury.
Only operate the appli-
ance when it is fully as-
sembled.
Do not insert the battery
into the appliance until it
is fully assembled.
Check that all safety
and protective devices
are in place and func-
tioning correctly before
switching on.
4.1
Installing the guard plate (02)
1. Insert the guard plate (02/1) onto the cutter
head (02/2). Ensure that the line is hanging
(02/3) freely.
2. Secure the guard plate on the cutter head
with the screws provided (02/4).
3. Place the guide wheel (02/5) on the guard
plate and tighten the screws.
442183_a
4.2
Installing auxiliary handle (03)
The holder (01/6) of the auxiliary handle (01/5) is
mounted on the telescopic handle. The supplied
replacement spool is integrated into the holder.
The angle of the handle can be individually adjus-
ted using the tip lever.
1. Slide the holder (03/1) onto the telescopic
handle.
2. Gently pull apart the grip bar of the auxiliary
handle (03/2) (03/a).
3. Push the auxiliary handle onto the holder (03/
b). The auxiliary handle must engage in the
linkage.
4. Position the tip lever (03/3) with the bolt
holder on the clamping bolt (03/4).
5. Tighten the clamping bolts so that the tip
lever can be moved with little force.
5 START-UP
5.1
Charging the rechargeable battery
NOTE
For detailed information, heed the separ-
ate operating instructions for the re-
chargeable battery and for the charging
unit.
CAUTION!
Danger of fire during
charging!
Due to heating of the char-
ger, there is a danger of
fire if it is placed on an in-
flammable surface and is
not adequately ventilated.
Always use the charger
on a non-inflammable
surface or in a non-com-
bustible environment.
If available: Keep the
ventilation slots free.
45

Publicité

loading

Ce manuel est également adapté pour:

113633