Operation - Cameo Q SPOT 40 RGBW Manuel D'utilisation

OPERATION

PLEASE NOTE:
• As soon as the spotlight is correctly is connected to the power supply, the following will be displayed in succession: "Software Update
Please Wait..." (only for service purposes), "Welcome to Cameo", the model name and the software version. After this process, the lamp is
ready for operation and starts in the previously selected mode.
• If one of the DMX operating modes is activated and there is no DMX signal at the DMX input, the display will start to flash after a few
seconds.
• After approximately 30 seconds of inactivity, the display will automatically show the currently active operating mode.
• Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu structure that allows direct access to previ-
ously selected menu items and sub-menu items. 1. Press MODE and ENTER simultaneously for direct access to the last-edited sub-menu
item, where you can make changes instantly as required (DMX starting address and all modes). 2. Press MODE for direct access to the
last-selected and last-edited menu item. Press ENTER to access the last-selected and last-edited sub-menu item (DMX starting address and
all modes).
CONFIGURING DMX START ADDRESS
Press the MODE button repeatedly until "Menu DMX Address" or "Menu Mode" appears in the display. If necessary, select the menu item
"Menu DMX address" by using the buttons UP and DOWN and press ENTER. Using the UP and DOWN buttons, select the desired DMX start
address and press ENTER to confirm. The DMX mode will start and the last-selected DMX mode will be activated simultaneously.
ENTER
UP/DOWN
SETTING OPERATING MODE (Mode)
Press the MODE button repeatedly until "Menu Mode" appears in the display. If necessary, select the menu item "Menu Mode" by using
the buttons UP and DOWN and then press ENTER. Now select the desired operating mode, but this time with the buttons UP and DOWN and
confirm with ENTER (see tables, note submenus). Comprehensive DMX tables can be found in these instructions under "DMX CONTROL".
Operating Modes
Mode DMX
Mode Sound
Mode Slave
Mode Auto
Mode Static
Mode Color Macro
6
–
= DMX operating modes
= sound control mode
= slave mode
= automatic control mode
= setting a "scene"
without an external
controller
= colour macros
ENTER
02CH = 2-channel mode
03CH1 = 3-channel 1 mode
03CH2 = 3-channel 2 mode
04CH = 4-channel mode
09CH = 9-channel mode
Sound = spotlight reacts to bass impulses. Adjustable micro-
phone sensitivity.
Slave = connect DMX IN on the slave unit to DMX OUT on
the master unit (same model) and enable one of the
standalone modes on the master unit. Now the slave
unit will follow the master unit.
Fade = colour blending with speed setting (speed).
Program = combination of fade and jump modes with speed
setting (speed).
Jump = dramatic colour changes with speed setting (speed).
Static = master dimmer, fine dimmer, strobe (strobe function
as channel 3 in 9-channel mode) and the individual
colours can be configured separately.
= 15 different preset colour macros are available.