Introduction - Cameo Q SPOT 40 RGBW Manuel D'utilisation

to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not exceed the
specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national
accident prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential
health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels
(SPL) that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged
exposure to volumes in excess of 90 dB.

INTRODUCTION

COMPACT 40 W LED RGBW SPOT
CLQS40RGBW (black housing)
CLQS40RGBWWH (white housing)
CONTROL FUNCTIONS
2-channel, 3-channel, 4-channel, 9-channel DMX control
Master/Slave operation
Standalone operation
FEATURES
Compact spotlight with RGBW quad-LED, 5 DMX modes, DMX-512 control, RDM-enabled, master/slave mode, stand-alone programmes,
sound control, fast access feature, securing lug and mounting bracket, 2 diffusers for different beam angles, black or white housing colour,
operating voltage 100–240 V AC/50–60 Hz, power consumption 55 W.
OPERATION
The Cameo QS 40 RGBW is a compact, DMX-512-controllable LED spotlight which can be operated in master/slave mode or as a standalone
device. In addition, the floodlight features the RDM standard (remote device management). Remote device management allows the user to
view status and configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.