Introduction - Cameo ZENIT W600 D Manuel D'utilisation

Masquer les pouces Voir aussi pour ZENIT W600 D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not exceed the
specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.

INTRODUCTION

ZENIT W600 D OUTDOOR LED WASHLIGHT
CLZW600-D
CONTROL FUNCTIONS:
1-channel, 2-channel, 3-channel, 4-channel, 6-channel DMX control
Master / slave mode
Standalone operation
W-DMX™
FEATURES:
DMX-512. 40 x 18 W high-power CREE daylight LEDs. W-DMX™. Stroboscope. 16-bit dimmer. 4 dimmer curves. LED PWM frequency can
be set. Fast access feature. IP65-class protection. 5-pin DMX connections. Plastic feet. 2x Omega mounting brackets included. Operating
voltage
100–240 V AC. Power consumption 565W. 25°, 45°, 60° x 10°, 100° diffusers and flap optionally available.
The spotlight features the RDM standard (Remote Device Management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Clzw600-d

Table des Matières