Introduction - Cameo F2 T POLE OPERATED Manuel D'utilisation

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
The housing surface of the spotlight can heat up to temperatures as high as 70 °C in regular use. Ensure that it is not possible
to come into contact with the housing unintentionally. Always allow sufficient time for the lamp to cool down before
dismantling, carrying out maintenance work or charging etc.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Strobe effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobe effects are used.

INTRODUCTION

CONTROL FUNCTIONS
1-channel, 2-channel 1, 2-channel 2, 3-channel, 4-channel and 5-channel DMX-functions
Master/Slave operation
Standalone functions
FEATURES
15–40° beam angle, manual zoom. 200 mm Fresnel zoom lens, pan and tilt can be adjusted with the operating rod. Adjustable PWM
frequency (flicker-free). DMX-512 control. RDM-enabled. Manual control. Quicklight function. 4 dimmer curves. 16-bit dimming. Master/
slave operation. Extremely quiet operation due tocombined heat pipe and fan cooling. Operating voltage 100-240 V AC 50/60 Hz. Power
consumption 220 W. Mounting bracket, filter frames and 8-way barn door included.
LIGHT SOURCE CLF2T
1 x high-power 240 W Tungsten LED (warm white).
LIGHT SOURCE CLF2D
1 x high-power 240 W daylight LED.
Both spotlights feature the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.