Package Contents; Parts And Controls; Changing The Weight Unit - Beurer BF 195 Mode D'emploi

• Persons taking vasodilating or vasoconstrictor drugs
• Persons with significant anatomical deviations in their legs compared with their overall body height (leg
length significantly shorter or longer).

3. Package Contents

• 1 x Body Analysis Scale BF 195
• 2 x 3V batteries, type CR2032
• 1 x Quick start guide
• 1 x Instruction manual

4. Parts and Controls

Overview
1. Display
2. 'Down' key
3. 'SET' key
4. 'UP' key
5. Conductors
5. Initial Use
Inserting/replacing batteries
Remove the Battery Compartment Cover and insert two 3V CR 2032 batteries (included) according to
the indicated polarity. If the scale does not func tion, remove the batteries completely and reinsert them,
ensuring proper polarity.
When battery power becomes low, 'Lo' will appear in the LCD Display and the scale may shut off. Replace
both batteries with two new CR2032 button cell batteries, observing the correct polarity.

Changing the weight unit

The scale is set to weigh in pounds (lb) from the factory. Switch the scale on by briefly applying pressure to
the top surface with your foot for 1-2 seconds. Wait until '0.0' appears in the display. Press the unit button
on the rear of the scale until the desired weight unit appears in the LCD Display ('lb' for pounds, 'kg' for
kilograms or 'st' for stones).
Positioning the scale
Place the scale on a hard, flat surface with no carpet or rugs; a hard surface is crucial to accurate measurements.
5
6
1 2
3
4
5